How Much Does CCTV Installation Cost in Melbourne? (2026 Price Guide)
Share
CCTV installation in Melbourne starts from around $300 per camera, or about $1,400 for a complete 4-camera system fully installed. A standard 4-camera home system typically runs $1,400–$2,300 supplied and installed, 6-camera systems $2,200–$3,200, and 8-camera or 4K homes $3,000–$5,000. Small 2-camera setups start around $650, and commercial sites with 4–8 cameras land between $2,500 and $6,000. Most residential jobs are completed in a single day by a licensed technician. Your final price depends on camera count, resolution, property layout and whether the system is wired or wireless.
These are full supply-and-install figures — they cover the cameras, an NVR recorder, PoE cabling, configuration and a licensed technician's time, with no ongoing subscription. Below is the detail behind those numbers, and the factors that move a quote up or down.
Residential CCTV installation cost in Melbourne
| System | Typical use | Installed price (Melbourne) |
|---|---|---|
| 2 cameras | Front & back door, small home or unit | $650 – $1,300 |
| 4 camerasmost popular | Standard 3–4 bedroom home — entries, driveway, key areas | $1,400 – $2,300 |
| 6 cameras | Larger home, full perimeter and side access | $2,200 – $3,200 |
| 8 cameras / 4K | Large or double-storey home, premium coverage | $3,000 – $5,000 |
The 4-camera, 6MP system is the sweet spot for most Melbourne homes — sharp enough to identify faces and read number plates at a distance, without paying for coverage you won't use.
Commercial & business CCTV installation cost
| System | Typical use | Installed price (Melbourne) |
|---|---|---|
| 4 – 8 cameras | Retail shopfront, café, small office | $2,500 – $6,000 |
| 8 – 16 cameras | Warehouse, larger office, multi-zone site | $6,000 – $10,000 |
| 16+ cameras | Multi-building, industrial or high-security site | $10,000+ |
Two businesses can both ask for six cameras and end up with very different budgets. A single-storey office with an accessible ceiling cavity is a different job to a retail tenancy with public-facing entries, stock areas, after-hours risk and integration with alarms or access control. Camera count looks similar; the engineering effort isn't. See our commercial security systems hub for the full picture.
What drives the price up or down
- Number of cameras. The biggest single lever. Adding a camera to a compatible existing system usually costs $200–$350.
- Resolution. 4MP covers a door and driveway; 6MP is the best-value all-rounder for homes; 8MP/4K suits car parks, warehouses and high-security areas.
- Property complexity. Double-storey, heritage or brick homes with tight roof cavities add roughly $200–$500 for more involved cable runs.
- Wired vs wireless. Wired (PoE) is the reliability gold standard and our default for new installs. Wireless earns its place where cabling is impractical — rentals, heritage buildings, temporary sites.
- Local vs cloud recording. A local NVR avoids ongoing subscription fees and keeps footage on site; cloud adds off-site backup and easier multi-site access.
- Brand and camera tier. See below.
How much does CCTV cost per camera?
Most installers price the system rather than strictly per camera, because cabling, the recorder and configuration are shared across the job. As a rough guide, budget from around $200–$350 per camera to add to an existing compatible setup, and expect a standard 4–6 camera home to be completed and demonstrated in a single day.
Camera brands we install — and where each fits
| Tier | Brands | Best for |
|---|---|---|
| Value | HiLook | Budget-conscious homes wanting reliable, warrantied hardware |
| Professional | Hikvision, Dahua | The workhorse choice for most homes and small business |
| Premium / networked | UniFi Protect, Hanwha Wisenet, Axis | Multi-site, commercial and high-security environments |
We match hardware to the property and budget rather than pushing a one-brand-fits-all package. Weighing options? Compare Hikvision vs Dahua or Hikvision vs UniFi Protect.
Professional installation vs a DIY kit
DIY kits from the big-box stores look cheaper upfront. Over three years, once you factor in subscription fees, battery replacements and your own time, the total often lands close to a professionally wired system — but without 24/7 recording, clean cabling or a workmanship warranty. For a business, or anywhere you need continuous wired recording and usable footage when it matters, professional installation is the right call. If your existing system is failing, we also repair and upgrade CCTV across Melbourne, including systems we didn't install.
Do you need approval to install CCTV in Victoria?
There's no legal requirement to register a private home CCTV camera in Victoria, though Victoria Police runs a voluntary CCTV register that helps them contact you if nearby footage could assist an investigation. As a general courtesy and to stay clear of surveillance-device rules, cameras should be positioned to cover your own property rather than a neighbour's private living areas, and audio recording carries extra considerations. This is general information, not legal advice — for a specific site we'll design coverage that keeps the focus on your property.
Get a fixed-price Melbourne quote
Every property is different, so the most accurate number is a written one. We provide a free on-site assessment and a fixed-price written quote before any work begins — no obligation. Browse CCTV camera systems and packages, find your suburb, or get in touch below.
Frequently asked questions
How much does it cost to install CCTV in Melbourne?
CCTV installation in Melbourne starts from around $300 per camera, or about $1,400 for a complete 4-camera system fully installed. A standard 4-camera home system typically runs $1,400–$2,300, 6-camera systems $2,200–$3,200, and 8-camera or 4K systems $3,000–$5,000. Small-commercial 4–8 camera systems typically cost $2,500–$6,000.
How much does CCTV cost per camera?
Adding a camera to an existing compatible system usually costs $200–$350. For a new install, installers price the whole system rather than strictly per camera, because the recorder, cabling and setup are shared across the job.
How much is a 4-camera CCTV system?
In Melbourne, a professionally installed 4-camera system typically costs $1,400–$2,300, with 6MP the most popular resolution. That includes cameras, an NVR recorder, PoE cabling, configuration and installation — with no ongoing subscription.
Is professional CCTV installation worth it over a DIY kit?
For continuous wired recording, clean cabling and a workmanship warranty — yes. DIY kits are cheaper upfront, but over three years subscriptions, batteries and your own time often bring the total close to a professional system, without the same reliability. For businesses, professional installation is strongly recommended.
Do I have to register CCTV in Victoria?
No. There's no legal requirement to register a private home camera in Victoria. Victoria Police runs a voluntary CCTV register that can help them contact you if your footage might assist a nearby investigation. Cameras should be positioned to cover your own property.
How long does CCTV installation take?
Most 4–6 camera home systems are installed, configured and demonstrated in a single day. Larger commercial sites with complex cabling can take one to two days.
Should I choose wired or wireless cameras?
Wired PoE cameras are the reliability and image-quality gold standard and our default for new installs. Wireless suits situations where cabling is impractical — rentals, heritage buildings or temporary sites.